Share This Page

Locate the two house circuit breakers dedicated for the oven and reset both circuit breakers by flipping them both off and on 2-3 times and then see if that will restore power to the oven.

If not, your wall oven uses a thermal fuse that protects the oven from damage in the event of an electrical short or overheating. Check the thermal fuse for continuity. If the fuse is blown, it will kill power to the wall oven.

If the fuse is fine and the control panel has 120 volts supplied, then I suspect the control panel has failed. The display/oven control requires only 120 volts to power up, but the oven elements require 240 volts to heat up.

You can find parts, diagrams, and your owner's manual on Sears PartsDirect: searspartsdirect.com/model/5b7egioudf-001198/whirlpool-wos92ec0as03-electric-wall-oven-parts

This is the fuse: searspartsdirect.com/product/233klshsxx-0022-664/id-w10545255

This is the control panel in stainless steel: searspartsdirect.com/product/4sr5i4kfjf-0022-664/id-w10812332

How to use a multimeter to test electrical parts video: searspartsdirect.com/diy/article/how-to-use-a-multimeter-to-test-electrical-parts-video

Multimeter: sears.com/workpro-600v-ac-dc-digital-multimeter/p-A092195216?sellerId=SEARS

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician by calling Sears Home Services at 1-800-4-MY-HOME.

Hope this helps!

Your Kenmore top-load washer has a 4.8 cu ft capacity.

You can find parts, diagrams and your owners manual on Sears PartsDirect: searspartsdirect.com/model/s3p9qp56cn-000582/kenmore-11026132411-washer-parts

For repair, call Sears Home Services at 1-800-4-MY-HOME.

----
Here is a similar model, same capacity Kenmore 4.8 cu ft w/ water faucet: sears.com/kenmore-2631312n-31312-top-load-27inch-washer-white/p-A081639491?sellerId=SEARS

Larger Kenmore 5.3 cu ft model w/ water faucet: sears.com/kenmore-31652-5.3cu-ft-energy-star-top-load/p-A081639492?sellerId=SEARS

All top-load washers: sears.com/appliances-washers-top-load-washers/b-1101278?searsTab=true

Hope this helps!

Due to its age, Whirlpool says they cannot be sure of the capacity. Models made during that time where between 2.7-3.2 cu ft. I believe it's a 3.2 cu ft model.

Here are three similar Kenmore top-load models (made by Whirlpool for Sears) with larger capacities:
sears.com/kenmore-top-load-washer-w-deep-fill-option-8212-3.5/p-02620232000P?rrec=true

sears.com/kenmore-2620362-3.8-cu-ft-top-load-washer/p-A015131820?sellerId=SEARS

sears.com/kenmore-22352-4.2-cu-ft-top-load-washer/p-02622352000P?sellerId=SEARS

These three Kenmore models have a deep fill option that can be used to add extra water. Deep Fill is not available on Normal cycles due to government regulations. NOTE: Due to government relations all washers on the market today are High Efficiency washers.

All top-load washers: sears.com/appliances-washers-top-load-washers/b-1101278?searsTab=true

Hope this helps!

Please contact Whirlpool at 1-866-698-2538, since the owners manual does not have maintenance directions.

It could be useful to have the capacity of the washer. 

While you are waiting for an expert to respond, I have added a helpful link (

click here

) that may provide information to assist you with your question.

Error codes can be a hassle and keep your range from working properly. I did some research and I was able to find a link that will provide you with some good information. Click

here

for the link. I hope this helps with your research while you wait for your expert response.

Searspartsdirect.com

is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner.



Thank you for using

Searspartsdirect.com

!

I can understand how a reset button may get the Whirlpool dryer going, however, I don't believe any dryer has a reset button.  You may try resetting the house breakers if the dryer is not coming on.  Please provide more details as to what is wrong with the dryer and an expert can assist with troubleshooting.  Just click on reply to continue the thread. If you decide on service, that link is available below. 

Also I should mention we ran the diagnostic code finder and it said "Good" so there is no error code showing.